In fact, the wardrobe cabinet neon lights with silicone sleeves are very different from the traditional neon lights with silicone sleeves. First of all, the size of the wardrobe cabinet neon lights with silicone sleeves is relatively small. As for why it is small, it is because The area of wardrobe cabinets is special. The lighting does not need to be very extensive, but it needs to be illuminated to emit light in a designated direction. If the light is too bright, it will be dazzling. If the light area is too large, it will make it difficult to see clearly. Therefore, the neon lights with silicone sleeves on wardrobe cabinets are generally small in size and the lighting area is not large. will be very large. The need for a particularly wide luminous area does not mean that the wardrobe cabinet neon lights with silicone sleeves do not have high requirements for luminous quality. What they are after is a softer light without seeing the lamp beads, so there are certain product requirements. Dongguan Yutian mainly produces silicone tubes, food grade silicone tubes, medical silicone tubes
The second point is that the wardrobe cabinet neon lights with silicone sleeve products have a great competitive advantage. The price of silicone is calculated according to the unit weight, and the size of the wardrobe cabinet neon light with silicone sleeve is much smaller than the traditional silicone sleeve, which means its unit weight comparison. Lightweight, the silicone material used is less, and the unit price is naturally much lower than that of traditional silicone sleeves. Another competitive advantage is that it is compact and flexible, and can be adapted to various shapes of single-weight aluminum profiles, including rounded corners at 90° These shapes, such as shapes, will be accepted by many manufacturers once the unit price of the product has a greater advantage, which can also enhance the competitiveness of the entire set of products.
Compared with the traditional silicone sleeve, the neon light of the wardrobe cabinet also has disadvantages. It cannot directly pull the PCB board through the fiber line because the lower body is hollowed out and cannot be directly worn on the board. The straightforward point in the profile card slot means that the silicone sleeve with the neon light strip can be directly inserted into the aluminum profile buckle before it can be used. Ordinary silicone sleeves can be used by directly pulling the pcb board into the sleeve through the fiber wire. Therefore, the difference between the two in use is this. The wardrobe cabinet neon lights with silicone sleeves are PCB boards, aluminum profiles and sleeves that complement each other to form a complete product. Ordinary sleeves are more direct. PCB boards are threaded. Light up and use. In addition, the neon lights of the wardrobe cabinets with silicone sleeves cannot be used outdoors or waterproof, which is a more important point.
In addition to the above two important points, the wardrobe cabinet neon lights with silicone sleeves also have other features such as novel appearance, because there is no need to wear PCB boards and do not need plugs and fiber wires to pull these redundant actions. Traditional silicone sleeve accessories are more It is also relatively cumbersome to assemble. It is necessary to pull the PCB board through the fiber line, and it also needs a plug to seal the head and tail of the product. This is time-consuming and labor-intensive, which increases the cost of the enterprise for no reason and causes many unnecessary troubles. As for the appearance, the neon light of the wardrobe cabinet with a silicone sleeve has a peculiar structure, which can make a semicircle, hollow out, or appear in the shape of a moon, breaking the traditional structure of the silicone sleeve.