Silicone tube

Infusion heating silicone hose device
  • Infusion heating silicone hose device
  • Infusion heating silicone hose device
  • Infusion heating silicone hose device

Infusion heating silicone hose device

Dongguan Yutian has over 28 years of production management experience and only provides customers with high-quality infusion heating silicone hoses. This series of products mostly have multiple electronic functions, including infusion heating, temperature sensing, power transmission, data transmission, etc. The infusion heating silicone hose is an innovative model in terms of both extrusion production and practical ends. As of now, there are relatively few manufacturers that can fully produce a complete set of infusion heating silicone hoses.

Product Features

Four carbon fiber heating wires for faster heating

Extrusion combined with compression molding, the product is beautiful and high-grade

Uniform heating, heat conduction wire runs through the entire heating tube

Appearance secondary spraying treatment, does not absorb dust and feels soft

Made of electrical insulating materials to ensure data transmission

Wide range of temperature resistance, applicable from -40 to 200°

product description

The infusion heating silicone hose is made of three different processes. The first part is the tube body of the infusion heating silicone hose (four carbon fiber heating wires on the tube body). The four carbon fiber heating wires are made of silicone extrusion technology together with the silicone. Forming and extruding, while the tube body of the infusion heating silicone hose plays the role of heating. The combination of four heating wires and the power supply converts electrical energy into heat energy, and the infusion tube is also heated through the silicone heat conduction to the entire tube body. The second part is the power cord. This part is made by wire harness extrusion process. It should be noted here that the power cord of the infusion heating silicone hose needs to be made of high temperature resistant materials, otherwise it will be melted by high temperature, and the vulcanization process cannot use double twenty vulcanization process. Do. The third part is the molding process. This process is a relatively complicated part of the entire infusion heating silicone hose. The mold needs to be positioned so that all electronic components must be in the inherent position of the mold, otherwise electronic components will be generated. The components are exposed on the surface of the infusion heating device. In addition, all the components in the mold need to withstand pressure and temperature. Otherwise, high temperature and high pressure will be generated when the silicone is vulcanized, which will damage these electronic materials and make them unusable.

product specification

Infusion Heating Silicone Hose Technical Parameters
material Special silica gel, gas phase glue
color custom made
Hardness (shore C) 50~80°±5°
Density (g/cm3) 1.2
Tear strength (KN/m) ≥16
Tensile strength (Mpa) ≥5
Elongation at break (%) ≥170
Temperature range (°C) -40~200°
odor none, slight
Flame retardant (UL-94) HB
Thermal conductivity (W/mk) ≤0.1 (hardness ↑ thermal conductivity ↑)
Compression permanent change 100 degrees * 22H parking 24H compression 25% ≤5%
Environmental standards ROHS、FDA

Business advantage

  • Self-produced silicone raw materials

  • Self-produced silicone accessories

  • First-class R&D team

  • Efficient Engineering Team

  • ISO quality management certification

Accept a large number of OEM and ODM orders

  • custom size

  • color customization

  • performance customization

Silicone also has these properties

  • Low temperature resistance -40--60 degrees
  • High temperature resistance 200-300 degrees
  • Wear-resistant
  • Aging resistance
  • Tear resistance and high resilience
  • anti-static
  • Ozone resistant
  • Acid and alkali resistance
  • flame retardant
  • conductive
  • Anti-UV
  • Thermal insulation, sound insulation and shock absorption
  • Main application: rehabilitation, drainage, health industry, etc.

    Regular products are shipped immediately after ordering, and special specifications are customized

  • The product is tested by SGS company and complies with UL-94-V0

    Passed ROHS, REACH, FDA standards


Purchase of standard products