There are many differences between LED cabinet neon sign silicone sleeves and conventional neon sign silicone sleeves. It is also one of the most popular products in the recent neon sign market. The lighting and installation methods are unique. Under the premise of the requirements, a lot of cost can be saved. The embedded installation of the silicone strip used in the neon light of the LED cabinet only needs the size of the aluminum profile and the size of the silicone strip to match each other. There is no need to use fiber wires to pull the PCB board into the casing, but to attach the PCB board to the side of the aluminum profile. Press the silicone strip of the wardrobe neon light firmly to embed it and use it. And it is also very convenient in the later maintenance. For example, if the lamp bead is aging, you only need to replace the PCB board and then insert the neon silicone strip to use it. It is not difficult for ordinary people to operate and solve the after-sales problems of products for enterprises. The silicone strip for wardrobe neon lights is used indoors, so it does not need to be waterproofed, but the lighting effect cannot be low. Therefore, the lighting effect will not be affected by adding light guides and diffusing agents on the basis of silicone extrusion. Industry influences The lighting area of ​​the silicone strips for wardrobe neon lights is generally not particularly wide, but is known for its soft light effect. This effect is determined by the luminous surface of the silicone. If you want to enlarge the lighting area of ​​the silicone strips for the wardrobe neon lights The light-emitting surface can be made wide and the power of the PCB board can keep up with it. At present, the lighting area of ​​the wardrobe market is mostly between 4 and 10mm. Therefore, Yutian Company has positioned the neon silicone strip of the wardrobe at 4*8mm to meet the needs of mainstream customers in the market. , and 4*9mm two sizes.