Demand Submission


Please leave us a message and we will contact you within 24 hours

  • Name *

  • Email *

  • Phone

  • Purpose *

    Purpose *

  • Do you have any comments or questions

  • Submit

  • Security Code
    Refresh the code
    Cancel
    Confirm

PRODUCTS


Specializing in the production of highquality silicone rubber products

PRODUCT


Specializing in the production of highquality silicone rubber products

— Product Categories

— News Recommended

— Products Recommended

INQUIRY

在线询盘 MORE+
  • Name *

  • Email *

  • Phone

  • Purpose *

    Purpose *

  • Detailed requirements

  • Submit

  • Security Code
    Refresh the code
    Cancel
    Confirm

Inquiry Content:


You have no items to require

Add Successfully

Thermal Conductive Silicone Tube

Thermally conductive silicone tube, extruded and finished in our Dongguan plant. Five production grades from 0.79 to 1.68 W/(m·K), hardness 64–85 Shore A, rated −40 to +200 °C, minimum size 5 × 8 mm, cut to length. Tell us the heat load and we will recommend a grade.

  • Parameters
Yutian Silicone · Silicone manufacturer since 2012 · Dongguan, China
Thermal Conductive Silicone Tube

0.79–1.68 W/(m·K) across production grades · −40 to +200 °C · custom size and wall · cut to length

✓Power supply and IGBT heat paths ✓Power electronics and charger cooling ✓LED driver thermal coupling
0.79–1.68 W/(m·K) −40 to +200 °C Min. 5 × 8 mm Shore 64–85 A Cut to length
Five production grades tested Tensile 1.25–5.70 MPa Extruded, not moulded Samples from stock
Stock samples ship in 3 days Standard sizes 5–7 working days Custom profiles 10–20 working days

Three affiliated companies

Thermal tube is a compound problem before it is an extrusion problem. The tube is extruded and finished in our Dongguan plant, and affiliated companies working on silicone and rubber materials are in Guilin and Dongguan, so the compound conversation happens with the people who make it.

Guilin Yutian
New materials
Dongguan Huahong
Rubber and plastic materials
Dongguan Yutian
Extrusion and finishing
6,800 m² production facility 14 extrusion lines 90+ production staff Since 2012 in silicone

Why Yutian

Conductivity is a range, not a claim
0.79 to 1.68 W/(m·K) across five production grades. You pick the grade the heat path needs.
Five grades, full test data
Tensile, elongation, tear, hardness and density measured on each grade; report dated 24 April 2026.
Extruded to your wall
Minimum 5 × 8 mm, wall per drawing. A new size is a die change, not a mould.
Heat path, not just material
A tube couples a hot component to a sink or chassis. Wall contact and length matter as much as W/(m·K).
Stable at temperature
Rated −40 to +200 °C, so the tube keeps its shape on a heat sink that runs hot.
Cut to length before shipping
Tubes are cut to your length and packed to suit your assembly line.

Key advantages

0.79–1.68 W/(m·K) across five grades

One supplier, a thermal ladder

Five production grades were tested on 24 April 2026: 0.79, 0.88, 0.97, 1.32 and 1.68 W/(m·K). Instead of one headline number, you can specify the rung your heat path needs and keep cost proportional to performance.

→ One supplier, a thermal ladder

Full mechanical data published per grade

Not just conductivity

Tensile strength 1.25–5.70 MPa, elongation 74.3–199.2 %, tear strength 4.48–14.67 N/mm and hardness 64–85 Shore A are all measured. A thermal filler changes the rubber, and these numbers show how much.

→ Not just conductivity

Density tracks the filler load

1.57–2.74 g/cm³

Higher conductivity comes from higher filler loading, which raises density from 1.57 to 2.74 g/cm³. If weight matters in your assembly, that is a design input, not a detail.

→ 1.57–2.74 g/cm³

Extruded size and wall, no mould

Minimum 5 × 8 mm

Tube is extruded, so a new diameter or wall is a die change rather than a mould. Size tolerance follows our published dimension table, for example ±0.15 mm on a 5 to 8.9 mm dimension.

→ Minimum 5 × 8 mm

−40 to +200 °C continuous

Keeps its shape on a hot sink

The tube has to stay in contact with a heat sink that runs hot. Rated from −40 to +200 °C, it does not soften away from the surface it is meant to couple.

→ Keeps its shape on a hot sink

Designed for contact, not just conduction

Wall and length are part of the spec

A tube works when it touches. We quote wall thickness and cut length together with the grade, because the interface is where the thermal path is usually lost.

→ Wall and length are part of the spec

Cut to length, packed for assembly

Shipped as parts

Tubes are cut to your length and packed so they go onto the line directly rather than through another converting step.

→ Shipped as parts

Samples before volume

Test the grade on your own hardware

Because the numbers describe the material and not your assembly, the practical test is a sample on your heat path. Stock samples ship in three days.

→ Test the grade on your own hardware

Production grades, measured

These are the five grades we run, not a catalogue of possibilities. Values below come from our test report dated 24 April 2026.

GradeW/(m·K)Tensile MPaElongation % Tear N/mmShore ADensity g/cm³
Thermal compound1.321.25199.24.48642.74
HTE 5015-90U0.972.8074.311.56812.41
CHN-JYT-2001.682.8096.17.59802.68
CHN-JYT-80-U0.795.70102.414.67851.57
CHN-JYT-200 + CHN-JYT-80-U0.884.10111.713.12821.98
Higher conductivity is bought with filler, and filler changes the rubber. Read the tensile and tear figures next to the conductivity figure before choosing a grade by W/(m·K) alone.

Technical specifications

MaterialSilicone with thermally conductive filler
Thermal conductivity0.79–1.68 W/(m·K), five production grades
Operating temperature−40 to +200 °C
Hardness64–85 Shore A, tolerance ±5
Density1.57–2.74 g/cm³ depending on grade
Tensile strength1.25–5.70 MPa
Elongation at break74.3–199.2 %
Tear strength4.48–14.67 N/mm
Minimum size5 × 8 mm; other sizes to your drawing
SizeExtruded to your inner diameter and wall
Wall thicknessPer drawing; dimensional tolerances per our published table
LengthCut to your length
DocumentationTest report for the grade supplied, on request

Applications

Power supplies
IGBT and MOSFET heat paths
EV and battery
Pack cooling, charger internals
Electronics
CPU, GPU and chipset cooling
Power conversion
Chargers, inverters, power stacks
Telecom equipment
Base stations and RF units
LED lighting
Driver and high-bay thermal coupling
Industrial equipment
Servo drives, welders, motor starters
Solar and storage
Inverter and PCS cooling
OEM assembly
Cut-to-length kits for your line

Made to your specification

Conductivity – 0.79 / 0.88 / 0.97 / 1.32 / 1.68 W/(m·K)
Size – minimum 5 × 8 mm, other sizes to your drawing
Wall – per drawing, dimension tolerance per our table
Length – cut to your assembly length
Hardness – 64–85 Shore A, tolerance ±5
Cross-section – round tube, custom profiles on request
Grade – matched to your heat load and budget
Packing – cut lengths, packed for the line

Samples and lead time

Stock samples: 3 days
A standard size and grade can ship in three days so the grade can be tested on your own heat path.
Standard sizes: 5–7 working days
A standard diameter in a standard grade is produced and shipped inside a week.
Custom profiles: 10–20 working days
A new diameter, wall or filler loading needs a die and a production slot.

Certifications and quality

ISO 9001 · ISO 13485
Quality systems
RoHS · REACH
Compliance
Test report
24 April 2026
2,600+ customers supplied ≥95% monthly inspection pass rate 99% batch acceptance rate

Frequently asked questions

What thermal conductivity can you supply?
0.79, 0.88, 0.97, 1.32 and 1.68 W/(m·K) across five production grades. The grade is chosen with the heat load and the assembly, not by the highest number alone.
What is the smallest tube you make?
Our smallest size is 5 × 8 mm. Wall thickness follows your drawing, with tolerances from our published dimension table.
How is the tube sized and tolerated?
The tube is extruded to your inner diameter and wall. Dimensions follow our tolerance table, for example ±0.15 mm for a dimension between 5 and 8.9 mm, and cut length tolerance follows the cutting table.
What temperature does it work at?
−40 to +200 °C continuous.
Will a conductive grade still be flexible?
Hardness runs 64–85 Shore A and elongation 74.3–199.2 %. Filler loading changes stiffness as well as conductivity, so the mechanical figures for each grade are published so you can check fit before ordering.
How do I get a sample?
Tell us the conductivity grade, inner diameter, wall and length. Stock combinations ship in three days; the test report for the grade is available on request.

Need a thermal tube for a heat path you have to prove?

Send the inner diameter, wall, length and the heat load. We will recommend a grade and send a sample; the test report for the grade is available on request.

Request a quote →
Dongguan Yutian Silicone Rubber Technology Co., Ltd · Silicone manufacturer since 2012
0.79–1.68 W/(m·K) · −40 to +200 °C · min. 5 × 8 mm · extruded silicone tube
Mobile / WhatsApp: +86 180 2892 1514 · Email: salesmanager@yutiansilicone.com
Thermal Conductive Silicone Tube
Thermally conductive silicone tube, extruded and finished in our Dongguan plant. Five production grades from 0.79 to 1.68 W/(m·K), hardness 64–85 Shore A, rated −40 to +200 °C, minimum size 5 × 8 mm, cut to length. Tell us the heat load and we will recommend a grade.
Long press to look detail
Long by picture save/share
INQUIRY

在线询盘 MORE+
  • Name *

  • Email *

  • Phone

  • Purpose *

    Purpose *

  • Detailed requirements

  • Submit

  • Security Code
    Refresh the code
    Cancel
    Confirm

Inquiry Content:


You have no items to require

Add Successfully

Thermal Conductive Silicone Tube

Contact Us Now
INQUIRY

在线询盘 MORE+
  • Name *

  • Email *

  • Phone

  • Purpose *

    Purpose *

  • Detailed requirements

  • Submit

  • Security Code
    Refresh the code
    Cancel
    Confirm

Inquiry Content:


You have no items to require

Add Successfully

Message

Hi!If you are looking for custom-made silicone rubber products, feel free to ask me any questions.

图片展示
  • Name *

  • Email *

  • Phone

  • Purpose *

    Purpose *

  • Do you have any comments or questions

  • Submit

  • Security Code
    Refresh the code
    Cancel
    Confirm

    CONTACT


    Address:Room 801, Building 10, No. 2, Tutang Industrial 2nd Heng Road, Changping Town, Dongguan City, Guangdong Province, China

     

    • Mobile:
    • 0086-18028921514
    • Fax:0086-769-82555312
    • Email:salesmanager@yutiansilicone.com

    Link: China Edge-lit Lighting, Backlight Lighting Manufa

    Contact Us

    Address:Room 801, Building 10, No. 2, Tutang Industrial 2nd Heng Road, Changping Town, Dongguan City, Guangdong Province, China

     

    • Mobile/Whatsapp:
      0086-18028921514
    • Fax:86-769-89221009
    • Email:salesmanager@yutiansilicone.com

     

    Copyright © 2015-2026 All Rights Reserved.

    Copyright © 2015-2026 All Rights Reserved.   

    Service Center

    Please choose online customer service to communicate

    Contacts
    Phone
    +8618028921514
    Service time
    From Monday to Sunday
    E-mail
    salesmanager@yutiansilicone.com
    Scan a QR Code
    Qrcode
    WhatsApp
    Add WeChat friend to learn more about the product
    Use Enterprise WeChat
    "Scan" to join the group chat
    Copy success!
    Add WeChat friend to learn more about the product
    I see.