Demand Submission


Please leave us a message and we will contact you within 24 hours

  • Name *

  • Email *

  • Phone

  • Purpose *

    Purpose *

  • Do you have any comments or questions

  • Submit

  • Security Code
    Refresh the code
    Cancel
    Confirm

Silicone Foam Tube Manufacturer

Silicone foam tube is made from food‑grade / industrial‑grade silicone with foaming agents, cured and expanded at high temperature to form a micro‑cellular honeycomb structure. Through physical or chemical foaming, countless independent tiny air pockets are created, resulting in a lightweight porous material. It is soft, elastic, and offers excellent cushioning, vibration damping, noise reduction, and thermal insulation. It also resists extreme temperatures, aging, yellowing, and provides waterproof sealing with moderate breathability.
Micro‑cellular honeycomb structureSoft & elasticCushioning · noise reductionHigh/low temp resistance · anti‑aging

Silicone Foam and Sponge Tubing

Silicone foam tube, also called silicone sponge tubing, is a low-density, compressible silicone tube extruded from 1-100 mm ID with 1.5–10 mm wall and 0.2–1.0 g/cm³ density, for continuous service from −40 to +200 °C. Yutian Silicone has produced it in-house since 2012 on 14 extrusion lines, so hardness, wall tolerance and foam structure stay repeatable from sample to production order. Typical uses are sealing and cushioning, thermal and acoustic insulation, wire and cable protection, and equipment padding in automotive, machinery, electronics and appliance assemblies. Custom IDs, wall thickness, colour and flame retardant grades are available; stock samples ship in 3 days and standard orders in 5–7 working days.
Silicone foam tubing

Silicone foam tubing

Silicone foam tubing is extruded from silicone compound with a foaming agent, so the wall is light, compressible and thermally insulating. Supplied in −40 to +200 °C grades, 0.2–1.0 g/cm³ density and 15–70 Shore C hardness, cut to length or coiled. Colour, bore and wall are built to the drawing.
High temperature resistant foam silicone tube

High temperature resistant foam silicone tube

High temperature foam silicone tubing is the foamed grade built for the hot side: a silicone wall made light and compressible by a foaming agent, on a compound that keeps its recovery through 250–300 °C peaks. Continuous service is −40 to +200 °C, density 0.2–1.0 g/cm³ and hardness 15–70 Shore C, in sections from 1 to 100 mm.
Low density silicone foam tube

Low density silicone foam tube

Introducing our cutting-edge Low-Density Foamed Silicone Tubes, engineered to offer a unique combination of lightweight construction, exceptional flexibility, and unparalleled durability. These tubes are specifically designed for applications where a balance of performance and cost-effectiveness is crucial. Crafted from high-grade silicone, our Low-Density Foamed Silicone Tubes feature a unique foamed structure that provides exceptional compressibility and resilience.
Flame retardant silicone foam tube

Flame retardant silicone foam tube

Flame retardant foam silicone tubing is the foamed grade on a flame-retardant compound: a light, compressible wall that stops burning once the ignition source is removed. Compounds are rated UL-94 HB to V-0, with a UL yellow card or without, in −40 to +200 °C service, 0.2–1.0 g/cm³ and 15–70 Shore C.
Foamed silicone tube for printer

Foamed silicone tube for printer

Foam silicone tube for printer rollers is a foamed sleeve bonded onto a metal core and ground to the finished diameter: the foam gives compression and friction, the core gives rigidity and torque. Supplied at 25±5 Shore C, about 0.45 g/cm³ and −40 to +200 °C, with the finished outside diameter held to ±0.05 mm.
Silicone foam insulation tube

Silicone foam insulation tube

Silicone foam insulation tube: a slip-on foam sleeve for hot and cold lines, with a compound conductivity of ≤0.1 W/(m·K) and continuous service from −40 to +200 °C. Bores run 1–100 mm with the wall set by the surface temperature target, in 15–70 Shore C; food-contact compound documented to FDA 21 CFR 177.2600.

Silicone Foam Tube Specifications

Full range for extruded foam tube, with samples cut from each grade before production.

Parameter Specification
Material Silicone rubber with foaming agent
Also known as Silicone sponge tube, silicone sponge tubing
Hardness 15 – 70 ± 5 Shore C
Density 0.2 – 1.0 ± 0.1 g/cm³
Tensile strength ≥ 0.8 MPa (rises with hardness)
Tear strength ≥ 2 kN/m (rises with hardness)
Elongation at break ≥ 200% (falls as hardness rises)
Compression set at 25% ≤ 12%
Service temperature −40 to +200 °C (+300 °C on request)
Thermal conductivity ≤ 0.1 W/(m·K)
Flame resistance UL94 HB to V-0
Section size 1 – 100 mm
Colour Any colour to sample
Certifications RoHS; test reports on request

Cut-to-length, adhesive backing and splicing are available on request. Detailed parameters are confirmed against the approved sample.

Silicone Foam Tube Advantages

Wide temperature range

Stable and flexible from −40 to +200 °C; grades rated to +300 °C on request.

Water and dust sealing

Compresses into uneven gaps to seal water, dust and air.

Impact and vibration cushioning

Absorbs shock and vibration without adding weight to the assembly.

Thermal insulation

Thermal conductivity ≤ 0.1 W/(m·K) keeps heat in or out.

Noise damping

Breaks up transmitted noise in machinery, appliance and vehicle enclosures.

Compression recovery

≤ 12% compression set at 25%, so the seal springs back after repeated clamping.

Flame retardant grades

UL94 HB to V-0 compounds for equipment and vehicle builds.

In-house extrusion since 2012

14 extrusion lines, 1–100 mm sections, samples in 3 days.

Silicone Foam Tube Applications

Where extruded silicone foam tube goes into production, and what it solves in each case.

Automotive and transport

Seals and padding that stay flexible through engine-bay heat and winter cold.

Door and window weather seals
Battery pack and underbody padding
Cable and harness protection

Industrial machinery

Vibration and impact absorption where metal parts meet.

Equipment mounting pads
Guard and panel seals
Cable entry grommets

Electronics and appliances

Cushioning and sealing inside enclosures and light fittings.

LED luminaire gaskets
Wire and cable sleeves
Appliance door and panel seals

HVAC and refrigeration

Thermal breaks and seals on pipework, ducting and cold rooms.

AC and chilled-water pipe insulation
Cold chain equipment sealing
Duct and panel wrapping

Medical and fitness equipment

Soft buffers on equipment that is handled and adjusted every day.

Device and cart buffers
Fitness machine padding
Frame grips and edge trim

Construction and building

Weatherstrip and joint backing for doors, windows and cladding panels.

Door and window weatherstrip
Expansion joint backing
Acoustic and impact isolation

Why Choose Yutian Silicone

Silicone foam tube extruded in-house in Dongguan since 2012.

Extruded on our own lines

14 extrusion lines since 2012, sections from 1 to 100 mm — no outsourced compounding.

Every batch checked

Monthly inspection pass rate ≥95%, batch acceptance rate 99%. Density, hardness and compression set are recorded per lot.

Samples in 3 days

Stock samples ship in 3 days; standard orders in 5–7 working days.

Made to your spec

ID 1–100 mm, density 0.2–1.0 g/cm³, hardness 15–70 Shore C, colours and flame retardant grades to order.

2,600+
Customers supplied
8M m
Monthly capacity, maximum
UL94
HB to V-0 grades
−40 to +200 °C
Service range, +300 °C on request

How ordering works

Four steps from your drawing to a shipped lot. Nothing starts before the sample matches the spec.

1
Send your spec
ID, wall thickness, density or hardness, service temperature and quantity. A drawing or an old sample works just as well.
2
Check a sample
We extrude against your spec and send a piece for your own testing; stock samples leave in 3 days.
3
Confirm and produce
Standard orders run 5–7 working days; custom compounds and new dies are quoted with the lead time.
4
Inspect and ship
Batches are checked for density, hardness and compression recovery before packing, with the inspection record in the box.

Cut-to-length, splicing and adhesive backing are quoted with the part. Where a new extrusion die is needed, tooling is quoted separately.

Foam Silicone Tube FAQ

What sizes, density and hardness can you supply?
Sections from 1 to 100 mm, with wall thickness made to your drawing. Density runs 0.2–1.0 g/cm³ and hardness 15–70 Shore C. White, grey and black are standard; other colours are quoted per batch.
What is the working temperature range?
−40 to +200 °C in continuous service. Grades rated to +300 °C are available on request; tell us the peak temperature and dwell time when you enquire.
What is the compression set of the tube?
≤12% measured at 25% compression. Recovery after long clamping is what keeps a gasket sealing, so the figure is recorded and reported per batch.
Which certificates come with the tube?
FDA, RoHS, REACH, NSF, LFGB, ISO 9001, ISO 13485, and the ISO 10993 biocompatibility reports (cytotoxicity, skin sensitisation, skin irritation). Flame retardant grades are supplied with UL94 HB to V-0 reports — a material test, not a product UL certification.
What is the minimum order and what does tooling cost?
Minimum order value is USD 500. Standard sections need no tooling; where a new extrusion die is required, tooling is USD 100–400 per part and is quoted with the drawing. Spliced and bonded parts carry a bonding charge.
How fast are samples and production?
Stock samples ship in 3 days. Standard orders run 5–7 working days; custom compounds and new dies usually 10–20 working days.
Can you cut to length, splice, or add adhesive backing?
Yes. Tube is supplied cut to length, spliced into rings and frames, or laminated with adhesive backing. All three are quoted with the part instead of as a separate service.
Silicone foam tube or solid silicone tube — which should I use?
Foam tube is the lighter, more compressible choice when the job is sealing, cushioning or insulation. Solid tube carries pressure and fluid, so it suits hose and transfer duties. Send the drawing if a part has to do both and we will say which one holds the tolerance.
Is the tube platinum-cured or peroxide-cured?
Both are available. Platinum-cured tube is the usual choice where the part touches food or skin; peroxide-cured is the lower-cost option for general industrial sealing. Tell us the application and we quote the grade that fits it.
Are you a manufacturer or a trading company?
Yutian Silicone is the manufacturer: 6,800 m² in Dongguan, 14 extrusion lines, extruding in house since 2012. Factory visits and live video tours are welcome.

Yutian - Your Foam Silicone Tube Supplier in China

Send the application and the section; the profile, the sample and the lead time come back in one reply.

✓Stock sections ship in 5–7 working days ✓Tooling USD 100–400 per custom die, one-time ✓Stock samples 3 days, custom 10–20 working days

Minimum order value USD 500. Custom sections are quoted with the die and the sample batch.

Related Products

INQUIRY

在线询盘 MORE+
  • Name *

  • Email *

  • Phone

  • Purpose *

    Purpose *

  • Detailed requirements

  • Submit

  • Security Code
    Refresh the code
    Cancel
    Confirm

Inquiry Content:


You have no items to require

Add Successfully

Foamed silicone tube — the range, and what we need to quote it

Foamed silicone tube for cushioning, sealing, vibration damping and thermal insulation.

Bore, wall, colour and hardness built to the drawing; rated −40 to +200 °C.

Send the application, the bore and the duty it works in — the first answer comes back as a construction, not a price.

ISO 9001RoHS and REACH at compound level90+ production staff

CONTACT


Address:Room 801, Building 10, No. 2, Tutang Industrial 2nd Heng Road, Changping Town, Dongguan City, Guangdong Province, China

 

  • Mobile:
  • 0086-18028921514
  • Fax:0086-769-82555312
  • Email:salesmanager@yutiansilicone.com

Link: China Edge-lit Lighting, Backlight Lighting Manufa

Contact Us

Address:Room 801, Building 10, No. 2, Tutang Industrial 2nd Heng Road, Changping Town, Dongguan City, Guangdong Province, China

 

  • Mobile/Whatsapp:
    0086-18028921514
  • Fax:86-769-89221009
  • Email:salesmanager@yutiansilicone.com

 

Copyright © 2015-2026 All Rights Reserved.

Copyright © 2015-2026 All Rights Reserved.   

Service Center

Please choose online customer service to communicate

Contacts
Phone
+8618028921514
Service time
From Monday to Sunday
E-mail
salesmanager@yutiansilicone.com
Scan a QR Code
Qrcode
WhatsApp
Add WeChat friend to learn more about the product
Use Enterprise WeChat
"Scan" to join the group chat
Copy success!
Add WeChat friend to learn more about the product
I see.