Demand Submission
Please leave us a message and we will contact you within 24 hours
Braided silicone hose manufacturer
Yuda braided silicone hoses are specifically designed for high-pressure and high-temperature fluid transfer applications.
Benefiting from an advanced braided reinforcement structure, they significantly outperform standard silicone hoses in terms of durability, stability, and service life.
This product is widely utilized in medical systems, food processing equipment, industrial machinery, and various high-performance application sectors.
● High Pressure Resistance (up to 3.8 MPa)
● Temperature Range: -40°C to 200°C
● Reinforced Braided Structure
● Flexible Yet Anti-Collapse
● Food & Medical Grade Available
● Custom Size, Structure & Material
YUTIAN Braided silicone hose
Yutian Silicone offers premium braided silicone tubes as a superior alternative to rubber or PVC hoses. Featuring platinum-cured silicone with reinforced braiding (stainless steel/polyester/aramid), they provide high pressure resistance, -40°C to +200°C stability, and FDA/USP Class VI options. With 30+ years of expertise and full customization (ID 3–50mm), we help you build safer, more durable end products.
Braided silicone hose for Bubble Tea Machine
This braided silicone hose is made for bubble tea machines, offering food-grade safety, high-pressure resistance, and platinum-cured purity. Flexible, durable, and odor-free, it performs reliably in high-demand beverage environments. Operating safely from -40°C to 200°C, it’s the perfect tubing for clean and efficient drink dispensing.
Braided Silicone Tubes for Ice Makers
✔️ Extreme Temperature Resistance
Operates flawlessly from -40°C to +250°C
No hardening/cracking in freezer environments
✔️ Food Safety Guaranteed
Compliant with FDA 21 CFR 177.2600 & NSF/ANSI 51
Zero odor transfer even after 5,000+ freeze-thaw cycles
Braided silicone tube for coffee machine
Extreme Temperature & Pressure Resistance
Food Safety & Certifications
Durable Braided Design
External braided silicone tube
External braided silicone tube, the ultimate solution for diverse applications. Ideal for industrial fluid transfer, automotive cooling systems, and medical devices, our tube boasts high-pressure resistance and chemical compatibility. The braided reinforcement adds strength and flexibility, ensuring reliable performance in harsh conditions. Whether you need tubing for petrochemical processing, automotive engines, or medical equipment.
Braided silicone tube for oxygen concentrator
Our oxygen concentrator silicone braided tubing ensures absolute security and efficiency in oxygen transmission. After rigorous testing, our silicone tubes exhibit outstanding high-temperature and corrosion-resistant properties, making them suitable for a variety of medical environments.
Double layer silicone mesh tube
The double-layer silicone mesh hose is a combination of advanced manufacturing technology and materials science, providing solutions for applications that require high performance and safety under extreme conditions. With inner and outer layers of silicone and a central layer of fiberglass filament, this hose ensures mechanical strength while maintaining the necessary flexibility to meet the demands of complex operating environments.
Standard Size Of Braided Silicone Hose
If you need custom sizes or special weaving parameters, please refer to the custom capabilities description above or contact us directly.
Application
Automotive & EV Thermal Management
Function: Braided silicone hose for automotive cooling systems circulates coolant (water‑glycol) between battery packs, electric motors, inverters, and radiators. Withstands continuous vibration, thermal cycling, and exposure to road salts and ozone.
Critical concerns / why silicone: Operating range -40°C to +150°C (peaks 175°C). Superior hydrolysis resistance vs polyamide. Low extractables prevent corrosion of aluminum cooling plates. Braid options: SS304 or polyester – galvanically compatible. Our reinforced silicone hose maintains flexibility for 10+ years under hood.
Bubble Tea & Beverage Dispensers
Function: Food grade silicone braided hose transfers hot tea (80–95°C), syrup, and milk in automated bubble tea machines. Resists frequent temperature changes and cleaning cycles.
Critical concerns / hygiene: Must be odorless and tasteless to avoid flavor taint. Certified FDA 21 CFR 177.2600 and NSF/ANSI 51. Smooth bore (Ra≤0.8μm) prevents sugar residue buildup. Our platinum cured silicone hose withstands daily CIP with mild detergents.
Water Dispensers (Instant Hot/Cold)
Function: Silicone hose for water coolers conveys both chilled water (0–10°C) and heated water (85–98°C) from internal tanks to dispensing nozzles. Requires flexibility and long-term contact safety.
Critical concerns / safety: Temperature range: -40°C to +200°C covers all needs. No plasticizer migration – platinum cured silicone ensures zero taste or odor transfer. Certified FDA and NSF 42/61. Inner surface smoothness prevents biofilm formation.
Coffee Machines (Commercial & Domestic)
Function: Our braided silicone hose for coffee machines delivers hot water (92–96°C) and high‑temperature steam (120–150°C) from boiler to brew head or steam wand. Withstands repeated thermal shock and vibration.
Critical concerns / why choose our solution: Rated for continuous -40°C to +200°C. Inner surface smooth bore (Ra≤0.8μm) prevents coffee oil buildup. Platinum cured silicone hose ensures no odour transfer. Braid: SS304 for corrosion resistance. Certified FDA 21 CFR 177.2600.
Ice Makers (Commercial & Modular Ice Machines)
Function: Silicone hose for ice makers transfers chilled water (0–10°C) and refrigerant brine. Our low‑temperature silicone braided hose stays flexible down to -40°C without cracking, crucial for ice production lines.
Critical concerns / selection tips: Requires NSF 51 certification and FDA food grade silicone tubing approval. Must be odorless & tasteless to avoid ice taint. Stainless steel braid resists corrosion in humid/freezing environments. Our platinum cured silicone hose guarantees zero extractables.
Oxygen Concentrators & CPAP Devices
Function: Medical grade silicone tubing delivers 90–95% oxygen from sieve beds to patient interfaces. Our USP Class VI braided silicone hose ensures non‑reactive, particle‑free gas transfer.
Critical concerns: Must meet USP Class VI biocompatibility and ISO 10993-5. Platinum cured silicone eliminates peroxide residues. Smooth bore (Ra≤0.8μm) prevents particle shedding – essential for lung‑sensitive patients. Ozone resistance for inside‑machine components.
Wine Making & Beverage Processing
Function: Food grade braided silicone hose for transferring grape juice, wine, and cleaning solutions during fermentation, filtration, and bottling. Used in peristaltic pumps and gravity flow lines.
Critical concerns / wine industry: Must be non‑tainting – platinum cured silicone has no taste or odor. Resists hot CIP (80°C, caustic) and acidic wine (pH 3–4). Smooth bore ≤0.8μm prevents microbial attachment. Certified FDA, EU 1935/2004. Braid optional for pressure transfer applications.
Why Choose Yutian Silicone Braided Hose
Platinum cured – zero peroxide by‑products
Unlike ordinary peroxide‑cured silicone, our platinum‑cured braided hoses contain no harmful residues. Certified FDA, NSF 51, and USP Class VI. Safer for food, medical, and high‑purity applications.
✓ Outperforms standard silicone in biocompatibility
Higher pressure rating with true braid reinforcement
Single SS braid: 12–15 bar / double braid: 20–25 bar. Many competitors use loose knit or insufficient coverage. We control braid density (≥90% coverage) to prevent bursting under spike pressure.
✓ 30% higher burst margin vs generic braided hose
Wide & reliable temperature performance
Continuous -40°C to +200°C; short peaks up to 250°C (high‑temp grade). Most PVC or rubber hoses fail above 80°C. Our silicone retains flexibility even after 10,000h thermal aging.
✓ No hardening or cracking in extreme cold/heat
Full customization – no minimum for trials
Braid material (304SS/316L/polyester/aramid), inner diameter (3–50mm), hardness (30–80 Shore A), color, length. Many suppliers reject small orders; we support trial runs from 50 meters.
✓ Low MOQ + fast sampling (3–5 days for standard)
Mass production capacity – 14 extrusion lines
With 14 dedicated silicone extrusion lines and a 6,800㎡ ISO 9001 plant, we produce >800,000 meters monthly. Raw material stock >200 tons ensures lead times as short as 10–15 days for repeat orders.
✓ 2x faster delivery than many trading companies
Ultra‑smooth bore for critical fluid purity
Standard Ra ≤0.8μm; upon request ≤0.4μm. Prevents particle trapping, bacterial adhesion, and protein residue – essential for dialysis, peristaltic pumps, and analytical instruments. Competitors often ignore this spec.
✓ Meets ISO 10993-5 surface finish requirements
Designed for longer lifecycle
Compression set ≤12% (ASTM D395), hydrolysis‑resistant, and UV‑stable. Our hoses last 3–5 years in continuous peristaltic pump use or outdoor solar applications — 2x longer than standard rubber or cheap silicone.
✓ Lower total cost of ownership (TCO)
Technical support & warranty you can trust
12‑month material warranty, lot‑traceable test reports, and pre‑/post‑sales engineering assistance. We help you select the right braid material, torque values, and fitting compatibility – not just sell hose.
✓ Free failure analysis and replacement if defect
Real customer story: finding the right braided silicone hose
“We didn’t even know what size we needed. Yutian helped us figure it out step by step.”
The customer: A European manufacturer of industrial peristaltic dosing pumps. They had been using a rubber hose that failed within 3 months due to chemical attack and temperature swings.
The initial request: They sent a simple drawing with only an outer diameter (OD = 12mm) and asked for a “braided silicone hose”. No inner diameter, no pressure rating, no temperature details, no fitting type.
Our approach – we asked the right questions instead of guessing:
- • What fittings will you use? – They showed a barbed connector with OD 8mm. So the hose ID must be slightly smaller (7.8–7.9mm) for a tight seal.
- • What working pressure and spikes? – Pump runs at 6 bar but spikes to 12 bar during startup. Therefore a single stainless steel braid (15 bar burst) was sufficient, not costly double braid.
- • Operating temperature range? – Fluid is 80°C but environment drops to -10°C in winter transporting. Standard -40°C to 200°C grade works perfectly – no special high‑temp needed.
- • Chemical resistance? – Pumping a dilute acid (pH 4). Standard platinum silicone resists pH 3–11; no need for fluorosilicone upgrade.
Our final recommendation: ID = 7.8mm ±0.1mm, wall thickness = 2.5mm, single SS304 braid (90% coverage), platinum‑cured silicone, length = 1.5m per piece. We also provided torque recommendations for the ear clamps (2.8 N·m) and shared a smooth bore test report (Ra = 0.65μm).
Result: The customer ordered 500 meters after testing 3 samples. Their hose failure rate dropped from 12% per year to 0.5%. They now routinely share their pump details with us, and we suggest the exact braided hose spec before they even measure.
You don’t need to know your exact size — we help you find the right braided silicone hose through application analysis.
Certification
Yutian silicone leather is developed and manufactured under strict international standards, ensuring compliance with global market requirements and long-term product reliability.
✔ International Certifications
ISO9001, ISO14001, FDA, LFGB, RoHS, REACH — compliant with EU & US regulations.
✔ 30+ Patents
Covering silicone material formulation, structure design, and manufacturing processes.
✔ Stable Quality Control
Standardized production ensures consistent quality and low defect rates for mass production.
✔ Global Market Experience
Serving clients in 30+ countries across medical, industrial, and consumer sectors.
How to choose the right braided silicone hose
1. Confirm continuous temperature exposure
Standard silicone works from -40°C to +200°C. For repeated steam or higher peaks (250°C+), specify high-temperature grade. Wrong temp = faster aging or burst.
2. Define working & burst pressure
Single stainless steel braid: 12–15 bar; double braid: 20–25 bar. Always add 25% safety margin. We provide hydrostatic test reports per batch.
3. Select fittings & connection type
Does your system need pre‑attached barbed, flanged, or threaded connectors? We integrate NPT, BSP, JIC, or sanitary clamps. Ensure fitting OD matches hose ID to avoid leakage or over‑stretching.
✔ Tip: Over‑expansion shortens reinforced layer life.4. Clamps & tightening torque – don't overtighten
Ear clamps, worm‑gear, or spring clamps are common. Excessive torque damages braid filaments and compresses silicone permanently, causing leaks. We recommend torque values (e.g., 2.5–3.5 N·m for ½" hose) and use liners for soft plating.
✔ Our lab tests show 20% lower clamp‑related failure with proper torque.5. Minimum bend radius & routing
Dynamic bend: ≥6 x hose OD; static: ≥4 x OD. Tighter radius will kink the braid and reduce pressure rating. For robotic or peristaltic pumps, choose high‑flex braid (polyester).
6. Check inner surface for fluid purity
Medical/pharma applications require smooth bore (Ra ≤ 0.8μm) to prevent particle trapping and bacterial adhesion. We offer laser‑proofed surface finish & lot‑specific smoothness test.
7. Match sterilization / CIP method
Autoclave (134°C, 30 min), gamma (≤50 kGy), or EtO? Our platinum‑cured hose withstands all three without cracking or blooming. Avoid aggressive acids during CIP unless using upgraded chemical‑resistant grade.
8. Environmental resistance (UV / ozone / chemicals)
Silicone naturally resists ozone & UV, but some industrial cleaners or fuels require validation. We test per ASTM D471. For outdoor UV >10,000h, our anti‑yellowing additive keeps clarity.
✔ Outdoor stickiness? Our matte/coated version reduces dust adhesion by >60%.Braided silicone hose FAQ
Everything you need to know about our braided silicone hose — from performance to customization.
Can your braided silicone hose handle continuous steam or high-temperature liquids (above 200°C)?
Yes. Our platinum-cured braided silicone hose operates continuously from -40°C to +200°C and withstands short-term exposure up to 300°C. Ideal for steam lines, coffee machines, and industrial hot fluid transfer.
Is the hose certified for food contact or medical use?
Absolutely. We provide FDA 21 CFR 177.2600, NSF/ANSI 51 (food equipment), and USP Class VI (biocompatibility) certifications. All materials are platinum-cured, non-toxic, and odorless.
What is the burst pressure? How do you guarantee it?
Burst pressure depends on braid layers: Single SS braid: 12–15 bar; Double SS braid: 20–25 bar. Each batch is hydrostatically tested to 1.5x working pressure. Test reports available upon request.
Can you customize braid material or pattern?
Yes — stainless steel (304/316), polyester, or aramid braiding. Patterns: diamond (flexibility) or herringbone (higher burst strength). Fully customizable.
How smooth is the inner surface? Suitable for medical/lab?
Extremely smooth bore (Ra ≤ 0.8 μm). No particle traps — ideal for peristaltic pumps, dialysis, and sterile fluid transfer.
Is the hose resistant to oil, ozone, UV? Will it become sticky outdoors?
Yes. Silicone inherently resists ozone, UV, and weathering. Our platinum-cured formula resists mild acids, alkalis, and cleaning agents. No stickiness after prolonged outdoor use.
Can the hose be sterilized? How?
Yes — withstands autoclaving (134°C, 30 min), gamma irradiation (≤50 kGy), and EtO sterilisation. No degradation in mechanical or optical properties.
How long does a custom sample take? Sample fee?
Standard samples (existing tooling): free + 3–5 business days.
Custom samples (new size/braid): $150–300 (deductible) with 10–15 working days lead time.
Custom samples (new size/braid): $150–300 (deductible) with 10–15 working days lead time.
What is the MOQ?
Standard stock sizes: MOQ = 100 meters. Custom dimensions/braid: MOQ = 500 meters. First-time trial orders as low as 50 meters accepted.
Do you offer technical support & warranty?
Yes — 12-month material warranty. Free pre-sales selection guidance and post-sales failure analysis (photos or sample return). We help you succeed.
Yutian - Your Expert Silicone Braided Hose Supplier in China
Yutian specializes in the R&D and manufacturing of silicone braided hose, providing stable, reliable, and customizable material solutions that empower clients to achieve product upgrades and efficient mass production.
Contact us for samples and expert support.
“Thank you Yutian for making the greatest and most dependable silicone products maker and supplier
with products that are incredibly strong, remarkably flexible, and simple to use.”
“The reliable silicone tube and nice services are offered by LegenDay, and we appreciate their help.
We also received our purchase quickly and of reliable quality.”
“I’m grateful for LegenDay assistance. LegenDay is a superb silicone tube goods manufacturer.
They helped me with the demands of my silicone tube company. The product has a lot of benefits.”
Related Products
INQUIRY
Add Successfully
One-Stop Silicone Product Solution
As a leading silicone products manufacturer based in China, Yutian offers a diverse range of customized silicone products for various industries. With our state-of-the-art facilities, including 8x40-meter assembly lines, on-site 5S management, and stringent quality control measures, we ensure top-notch production standards.
Brown Di
Brown Di
